Material properties

	APET/ MAPET	CPET	PP	PS	PLA	AMPET
Minimum temperature	-40°C	-40°C*	-40°C***	-40°C*2	0°C*	-40°C*
Maximum temperature	+70°C	+220°C	+121°C**	+85°C	+40°C	+220°C
Sealing possible	+	+	+	+	+	+
Fat resistant	+	+	+	+	+	+
Transparent	+	-	+	+ at contact	+	-
Colour variants	+	+	+	+	-	+
Density	1,35	1,32	0,91 / 1,01	1,05	1,25	1,32
Material rigidity	2.200 N/mm2	2.900 N/mm2	1.350 /1.700 N/mm2	1.900-2.500 N/mm2	3.500 N/mm2	2,900 N/mm2

 * Handle carefully at low temperatures
 ** Temperature limit for certain colours is max +40°C.
 *** Min. temp. dependent om PP material type.
 ² Clear PS down to -20°C.

Barrier properties

Permeability coefficients	APET & MAPET	CPET	CO-PP / Ho-PP	PS	PLA	AMPET
O2 Oxygen	100 - 160	66 - 78	2.500 - 4.500/ 1.550	6.000	500	66-78
CO2 Carbondioxid	200-500	230 - 260	9.500-14.400/ 8.800	18.000	2.500	230-260
H2O Water	10-30	14	7-12 / 6	60-150	300	14
N2 Nitrogen	5-20	9-16	700-880/ 640	2.000		9-16